I Pocket Beep Operation - Icom IC-2820H Instruction Manual

I Digital code/digital call sign
squelch
q Set the desired operating frequency on DV mode, Digital
code and MY CALL SIGN.
w Push [TONE•DTMF] several times to activate the digital
code or digital call sign squelch. (DSQL or CSQL)
• Digital call sign squelch "DSQL," Digital call sign beep "DSQL
", Digital code squelch "CSQL," Digital code beep "CSQL
no tone operation are activated in order.
e Operate the transceiver in the normal way.
r When the received signal includes a matching call
sign/code, the squelch opens and the signal can be heard.
• When the received signal's call sign/code does not match, digital
call sign/digital code squelch does not open, however, the MUTE
indicator shows signal strength.
Digital call sign pocket beep
Digital call sign squelch
The optional UT-123
" and
Digital code pocket beep
Digital code squelch
DTMF MEMORY ENCODER

I Pocket beep operation

q Set the desired operating frequency and the desired oper-
ating mode.
w Set the desired CTCSS tone, DTCS code, Digital call sign
or Digital code.
e Push [TONE•DTMF] several times to select "T SQL " or
"DTCS " appears.
• When DV mode operation, push
to select "DSQL " or "CSQL " appears.
rWhen a signal with the correct tone, code, digital call sign
or digital code is received, the transceiver emits beep tones
for 30 sec. and blinks " ."
t Push [PTT] to answer or push [MAIN•BAND] to stop the
beeps and blinking.
Pocket beep
Digital call sign pocket beep
10
[TONE•DTMF] several times
DTCS beep
Digital code pocket beep
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
66