ABB ACH550-UH User Manual page 484

2-138
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
Embedded fieldbus
Point
FLN LOC REF Commanded by FLN to temporarily "steal" input reference
control of the drive from its normal source and place it under
FLN control. This functionality is analogous to placing the
drive in HAND mode at the panel, with the reference control
being taken by FLN instead. HAND mode at the panel has
priority over this point. Thus, this point is only effective in
temporarily taking control from the analog inputs or some
other internal control functionality.
DI 1 ACTUAL Indicates the status of Digital Input 1 (1 = ON, 0 = OFF).
DI 2 ACTUAL Indicates the status of Digital Input 2 (1 = ON, 0 = OFF).
DI 3 ACTUAL Indicates the status of Digital Input 3 (1 = ON, 0 = OFF).
DI 4 ACTUAL Indicates the status of Digital Input 4 (1 = ON, 0 = OFF).
DI 5 ACTUAL Indicates the status of Digital Input 5 (1 = ON, 0 = OFF).
DI 6 ACTUAL Indicates the status of Digital Input 6 (1 = ON, 0 = OFF).
RO 1 ACTUAL Indicates the status of Relay Output 1 (1 = ON, 0 = OFF).
RO 2 ACTUAL Indicates the status of Relay Output 2 (1 = ON, 0 = OFF).
RO 3 ACTUAL Indicates the status of Relay Output 3 (1 = ON, 0 = OFF).
RO 4 ACTUAL Indicates the status of Relay Output 4 (1 = ON, 0 = OFF).
RO 5 ACTUAL Indicates the status of Relay Output 5 (1 = ON, 0 = OFF).
RO 6 ACTUAL Indicates the status of Relay Output 6 (1 = ON, 0 = OFF).
AI 1 ACTUAL Indicates the input level of Analog Input 1.
AI 2 ACTUAL Indicates the input level of Analog Input 2.
AO 1 ACTUAL Indicates the output level of Analog Output 1.
AO 2 ACTUAL Indicates the output level of Analog Output 2.
OK.ALARM Indicates the current alarm state of the drive
(1 = ALARM, 0 = OK).
OK.MAINT Indicates the current maintenance state of the drive
(1 = MAINT, 0 = OK).
Maintenance triggers are configured in drive parameter
Group 29.
ALARM WORD1 This point is a bit-field indicating active alarms in the drive.
ALARM WORD2 This point is a bit-field indicating active alarms in the drive.
LAST FAULT This point is first in the drive's fault log and indicates the most
recent fault declared.
PREV FAULT 1 This point is second in the drive's fault log and indicates the
previous fault declared.
PREV FAULT 2 This point is last in the drive's fault log and indicates the
oldest fault in the log.
OK.FAULT Indicates the current fault state of the drive
(1 = FAULT, 0 = OK).
ACH550 E-Clipse Bypass User's Manual
FLN Detailed Point Descriptions
Description
Drive
Parameter
0118, bit 2
0118, bit 1
0118, bit 0
0119, bit 2
0119, bit 1
0119, bit 0
0122, bit 2
0122, bit 1
0122, bit 0
0123, bit 2
0123, bit 1
0123, bit 0
0120
0121
0124
0125
0308
0309
0401
0412
0413