ABB ACH550-UH User Manual page 379

ACH550 E-Clipse Bypass User's Manual
Start-up
Start-up
Start-Up can be performed in two ways:
• Using the Start-Up Parameter List
• Changing the parameters individually from the Full Parameter List.
Note: Run motor from drive before attempting bypass operation.
Escape
Enabled LED
Drive and Bypass
Selected/Faulted LEDs
Drive/Bypass Select Keys
Start-up by changing the parameters from the start-up list
To change the parameters, follow these steps:
1 The Default Display indicates the
Bypass Control mode.
2 Press ENTER to enter the Main Menu.
3 Select the Startup Params with the
Up/Down arrows and press ENTER.
Down
LCD Display
Up
Enter
ON/Hand Key
OFF/Reset Key
Auto Key
Motor Run LED
ENTER
ENTER
2-33
Start-up