ABB ACH550-UH User Manual page 41

ACH550-UH User's Manual
Start-Up Assistant Mode
To start the Start-Up Assistant, follow these steps:
1
2
3
4
The Start-Up Assistant will guide you through the start-up.
The Start-Up Assistant guides you through the basic programming of a new drive.
(You should familiarize yourself with basic control panel operation and follow the
steps outlined above.) At the first start, the drive automatically suggests entering the
first task, Language Select.The assistant also checks the values entered to prevent
entries that are out of range.
The Start-Up Assistant is divided into tasks. You may activate the tasks one after the
other, as the Start-Up Assistant suggests, or independently.
Note: If you want to set the parameters independently, use the Parameters Mode.
The order of tasks presented by the Start-up Assistant depends on your entries. The
following task list is typical.
Task name
Spin the motor
Commission drive
Application
References 1 & 2
Select MENU to enter the main menu
Select ASSISTANTS with the UP/DOWN
buttons and select ENTER.
Scroll to COMMISSION DRIVE with the
UP/DOWN buttons and select SEL.
Change the values suggested by the
assistant to your preferences and then
press SAVE after every change.
• Prompts for control panel display language selection.
• Prompts for motor data.
• Guides user through rotation check.
Prompts for motor data.
Prompts for application macro selection.
• Prompts for the source of speed references 1 and 2.
• Prompts for reference limits.
• Prompts for frequency (or speed) limits.
Description
1-37
Control panel