ACH550-UH User's Manual
• For details on control connections, refer to the following sections:
–
–
–
–
–
–
• For electro-magnetic compliance (EMC), follow local codes and the requirements
in
example:
– Properly ground the wire screen cable shields.
– Keep individual un-screened wires between the cable clamps and the screw
– Route control cables away from power cables.
Drive's control connection terminals
on page 1-315.
Control connections
starting on page 1-49.
Application macros
Complete parameter descriptions
on page 1-185.
Embedded fieldbus
on page 1-259.
Fieldbus adapter
Motor cable requirements for CE & C-Tick compliance
terminals as short as possible.
on page 1-316.
on page 1-80.
on page 1-311. For
1-19
Installation