ABB ACH550-UH User Manual page 465

ACH550 E-Clipse Bypass User's Manual
Number
AI4
AI5
AI6
AI7
AI8
AI9
AI10
AI11
AI12
N2 analog output objects – bypass
The following table lists the N2 Analog Input objects defined for the ABB E-Clipse
bypass.
Number
AO1
AO2
AO3
N2 binary input objects – bypass
The following table lists the N2 Binary Input objects defined for the ABB E-Clipse
bypass.
Number
BI1
BI2
BI3
BI4
BI5
Object
ALARM WORD 2
HAND OFF AUTO
INPUT VOLT
PCB TEMP
KW HOURS
RUN TIME
A-B VOLT
B-C VOLT
C-B VOLT
Object
BYP RUNDLY
MB PARAM
MB DATA
Object
SYSTEM READY
SYSTEM ENABLED
SYSTEM STARTED
SYSTEM RUNNING
N2 LOCAL MODE
N2 Analog Inputs:
Bypass Scale
Parameter Factor
0309 1
0102 1
0105 0.1
0106 1
0108 1
0111 1
0112 1
0113 1
N2 Analog Inputs:
Bypass Scale
Parameter Factor
1614 1
NA 1
NA 1
N2 Binary Inputs:
Drive Parameter
Status Word 1 = Ready
Status Word 1 = Enabled
Status Word 1 = System Started
Status Word 1 = System Running
Status Word 1 = N2 Local
2-119
Units Range
Alarm mask
(see bypass
manual
description of
parameter
0309)
0=Off, 1=Hand,
2=Auto
V Average of line-
line input
voltage
°
C Temperature of
bypass board
kWh Bypass-mode
kilowatt hours
HR 0...65535
V Phase A -
Phase B voltage
V Phase B -
Phase C voltage
V Phase C -
Phase A voltage
Units Range
s 0...300
None 0...65535
None 0...65535
Range
Embedded fieldbus