Thermo Scientific
Channel 1-4 Setup Menus
Mode Menus for Conductivity, TDS, Salinity and Resistivity
Within the Channel 1, Channel 2, Channel 3 and Channel 4 setup menus are Method, Mode
and Temperature submenus, which can be used to customize measurement settings and
parameters for the selected channel. This section provides detailed information on the Mode
menus for each measurement parameter available when using a conductivity module.
1. In the measurement mode, press the setup key.
2. Press the ,, or key to highlight Channel 1, Channel 2, Channel 3 or Channel 4
and press the f3 (Select) key.
a. Select the appropriate channel number that the module of interest is connected.
3. Press the or key to highlight Mode and press the f3 (Select) key.
4. Press the or key to highlight Conductivity, TDS, Salinity or Resistivity and press the
f3 (Select) key.
5. Press the or key to highlight a menu option and press the or key to highlight a
submenu option. Onscreen text prompts provide instructions for changing parameters
within a selected menu option.
Chapter 5
Conductivity Measurement Module
Orion Versa Star Pro Meter User Manual
75