Table of Contents
Advertisement
C H A P T E R 3
18
Orion Star A220 Series Portable Meter User Manual
|
3
Meter Setup Menus
Main Setup Menu
The main setup menu of the Orion Star A220 series meters contains menus for measurement
settings, instrument settings, calibration and data logs and meter diagnostics in one location.
General Setup Menu Navigation
1. In the measurement mode, press the setup key to access the main setup menu.
2. Press the p, q, t or u key to scroll through and highlight a setup menu icon and press
the f3 (select) key to access the submenus for the selected menu.
3. Press the p or q key to scroll and highlight a submenu option and press the f3 (select)
key to access the parameters for the selected submenu.
4. Perform the appropriate actions to set the parameters and settings in the selected menu.
a. To select a value from a list of options, press the p or q key to highlight the desired
value and then press the f3 (select) key to set the value.
b. To enter a numeric value, use the popup number entry screen.
Press the f3 (edit) key to open the number entry screen.
i.
ii.
Press the p, q, t or u key to highlight a number,
decimal point or negative sign and then press the f3
(enter) key to select the highlighted item. Repeat until the
desired value is shown at the top of the screen.
iii.
Press the f2 (done) key to save the value and exit the number entry screen.
5. Press the f1 (back) key to navigate out of a menu and press the measure (esc) key to
return to the measurement mode at any time.
0
1
2
.
3
4
5
6
7
8
9
–
backspace
back
done
enter
Thermo Scientific
Advertisement
Table of Contents
