Thermo Scientific Orion Versa Star Pro User Manual page 105

Thermo Scientific
1.
2.
To Get
Continuous
Measurements:
3.
SYSTEM <CR>
SYSTEM Prints the Meter Type, Serial Number, Software Version
Example: Versa Star Pro, V11702, 11.20
SETRTC YY MM DD HH MM SS <CR>
SETRTC Set the date and time (in 24-hour format) for the meter
Example: SETRTC 18 03 29 15 00 00
GETCHCONFIG <CR>
GETCHCONFIG
Prints the meter channel configuration with mode details
GETMODE CHANNEL <CR>
GETMODE Print the channel measurement mode
Example: GETMODE 1
ESC <CR>
ESC
Stops the command being executed
STOP <CR>
STOP
Command stops continuous measurement from meter
Meter Measurement Data Example
Mode Format Example
Meter Type, Meter Serial Number, Meter Software Revision, Date, Time, Channel
Number, Electrode ID, Sample ID, User ID, Module Serial Number, Mode, pH Value, pH
Unit, mV Value, mV Unit, Temperature Value, Temperature Unit, Slope Value, Slop Unit,
pH
Method Number
Example: Versa Star Pro, V11702, 11.20, 29-03-18, 3:50:53 PM, Ch-1, SENSOR-01, 1,
ADMIN, VA12345, pH, 7.000, pH, 0.0, mV, 25.0, C (MAN), 100.0, %, M101 <CR>
SETCHANNEL X <CR>
a. X = Channel number
b. For multiple channels, enter channel numbers without commas
c. Example: SETCHANNEL 1 <CR>
SETREADTYPE X, 4 <CR>
a. X = Channel number
b. Y = Read Type (4 = Continuous)
c. Z = leave blank
d. Example: SETREADTYPE 1, 4 <CR>
GETMEAS <CR>
a. Prints the displayed channel measurement immediately and
continuously until the STOP <CR> command is given
b. Example: GETMEAS <CR>

Chapter 8 Data Transfer and Software Updates
Orion Versa Star Pro Meter User Manual

105