Thermo Scientific Orion Versa Star Pro User Manual page 31

Thermo Scientific
Refer to Chapter 4 pH, pH/ISE and pH/LogR Measurement Modules
performing a LogR temperature calibration with a glass-bulb pH electrode when using the Versa
Star Pro meter with pH/LogR measurement module.
Manual Temperature Entry
Enter a manual temperature value when MAN is selected in the Temperature Input menu.
1. In the measurement mode, press the setup key.
2. Press the ,,  or  key to highlight Channel 1, Channel 2, Channel 3 or Channel 4
and press the f3 (Select) key.
3. Press the  or  key to highlight Temperature and press the f3 (Select) key.
4. Press the  or  key to highlight Temperature Cal and press the f3 (Select) key.
5. Press the f3 (Clear) key, input the temperature value using the numeric keypad and then
press the f2 (Enter) key to save the value.
6. Press the measure (esc) key to return to the measurement mode.

Chapter 3 Meter Setup Menus
for detailed instructions on
Orion Versa Star Pro Meter User Manual

31