Channel 1-4 Setup Menus - Thermo Scientific Orion Versa Star Pro User Manual


Chapter 3 Meter Setup Menus

24 Orion Versa Star Pro Meter User Manual

Channel 1-4 Setup Menus

Within the Channel 1, Channel 2, Channel 3 and Channel 4 setup menus are Method, Mode
and Temperature submenus, which can be used to customize measurement settings and
parameters for the selected channel. The number of channel-specific setup menus and the
options within each channel-specific setup menu will vary depending on the number and types
of modules that are connected to the meter.

Access the Method menu to load, copy, edit, create or delete methods.

Select the Mode menu to review and update the measure mode and parameter settings for
the selected channel and module. Refer to the individual module chapters for detailed
information on the available settings for each measure mode.

Use the Temperature menu to set the temperature units, set the temperature input source,
perform a temperature calibration on an ATC temperature probe, conductivity probe with
built-in temperature or dissolved oxygen probe with built-in temperature when connected to
the meter or to enter a manual temperature value. The settings shown below may be
different depending on the type and number of modules connected to the meter.

When using an ion selective electrode (ISE) and Versa Star pH/ISE module, use the
Incremental Techniques menu to perform a single known addition, single known
subtraction, double known addition, double known subtraction, single analate addition or
single analate subtraction analysis.
Thermo Scientific