Meter Software Upgrade Procedure - Thermo Scientific Orion Versa Star Pro User Manual

Thermo Scientific

Meter Software Upgrade Procedure

Note: Back up all stored data in the meter before updating the meter software.
1. Download the latest software file for your Orion Versa Star Pro meter. The file will be in a
compressed ZIP format.
2. Unzip or extract the file to the computer's desktop. Note that the file must be extracted
before it can be used.
3. Disconnect the power adapter from the meter.
4. Connect the USB cable (included with meter) to the MINI B USB input on the back of the
meter and USB input on the computer.
5. Press and hold down the f1 key on the meter keypad and then connect the power adapter
to the meter.
a. Note that the meter display will not turn on.
6. After about five seconds, a new NGM_TITAN folder will appear on the computer (for
example, an E: drive folder).
7. Open the folder and then release the f1 key on the meter keypad.
a. If a folder does not appear on the computer, go to the computer's Start menu, select
Computer or My Computer, look for an option similar to the example above and open
the folder.

Chapter 8 Data Transfer and Software Updates
MINI B USB
Orion Versa Star Pro Meter User Manual

99