Logging Into The Administrator Account - Thermo Scientific Orion Versa Star Pro User Manual


Chapter 3 Meter Setup Menus

42 Orion Versa Star Pro Meter User Manual

Logging into the Administrator Account

Use the following procedure to log into the admin account after the System Access feature has
been enabled and the system admin has been set.
1. In the measurement mode, press the setup key.
2. Press the ,,  or  key to highlight System Access and press the f3 (Select) key.
3. Press the f3 (Admin) key to access the administrator account.
4. Use the meter keypad to enter the administrator password and press the f2 (Accept) key.
5. The System Administrator Setup screen will open. From this screen, the system
administrator can edit their name and password, create a new user account, edit an
existing user account, load an existing account or turn off the System Access feature.
6. To load an existing account:
a. Press the  or  key to highlight System Accounts, press the  or  key to
highlight Create/Edit/Load and press the f3 (Select) key.
b. Press the  or  key to highlight the account and press the f2 (Load) key to activate
the selected account.
7. To turn off the System Access function:
a. Press the  or  key to highlight System Accounts, press the  or  key to
highlight Turn Off and press the f2 (Save) key.
b. Press the f3 (Turn Off) key to confirm the action. Turning off the System Access will
disable all system restrictions and erase all names, passwords and access settings.
Thermo Scientific