Channel 1-4 Setup Menus; Mode Menus For Ph, Mv, Relative Mv, Orp And Ise - Thermo Scientific Orion Versa Star Pro User Manual

Thermo Scientific

Channel 1-4 Setup Menus

Mode Menus for pH, mV, Relative mV, ORP and ISE

Within the Channel 1, Channel 2, Channel 3 and Channel 4 setup menus are Method, Mode
and Temperature submenus, which can be used to customize measurement settings and
parameters for the selected channel. When using a pH/ISE module that is set to the ISE
measure mode, an Incremental Techniques submenu is also available. This section provides
detailed information on the Mode menus for each measurement parameter available when
using a pH, pH/ISE or pH/LogR module.
1. In the measurement mode, press the setup key.
2. Press the ,,  or  key to highlight Channel 1, Channel 2, Channel 3 or Channel 4
and press the f3 (Select) key.
a. Select the appropriate channel number that the module of interest is connected.
3. Press the  or  key to highlight Mode and press the f3 (Select) key.
a. The Incremental Technique option will only be shown when using the pH/ISE module.
4. Press the  or  key to highlight pH, mV, Relative mV, ORP or ISE and press the f3
(Select) key.
a. The ISE option will only be shown when using the pH/ISE module.

Chapter 4 pH, pH/ISE and pH/LogR Measurement Modules
Orion Versa Star Pro Meter User Manual

47