Thermo Scientific Orion Versa Star Pro User Manual page 45

Thermo Scientific
VSTAR-PH Versa Star pH Module
8 pin MiniDIN
BNC
Pin Tip
1. Remove the shorting cap protecting the BNC connector on the module.
2. Connect a pH electrode or ORP electrode to the BNC connector on the module.
3. Connect an ATC temperature probe to the 8 pin MiniDIN connector on the module.
4. Connect a reference half-cell electrode to the pin tip connector on the module (for use
when a half-cell sensing electrode with BNC connector is used).
5. Prepare the electrodes for use as instructed in the electrode user manuals.
VSTAR-ISE Versa Star pH/ISE Module
8 pin MiniDIN
BNC
Pin Tip
1. Remove the shorting cap protecting the BNC connector on the module.
2. Connect an ion selective electrode (ISE), pH electrode or ORP electrode to the BNC
connector on the module.
3. Connect an ATC temperature probe to the 8 pin MiniDIN connector on the module.
4. Connect a reference half-cell electrode to the pin tip connector on the module (for use
when a half-cell sensing electrode with BNC connector is used).
5. Prepare the electrodes for use as instructed in the electrode user manuals.

Chapter 4 pH, pH/ISE and pH/LogR Measurement Modules
Orion Versa Star Pro Meter User Manual

45