Thermo Scientific Orion Versa Star Pro User Manual page 50


Chapter 4 pH, pH/ISE and pH/LogR Measurement Modules

50 Orion Versa Star Pro Meter User Manual
mV, Relative mV and ORP Mode Menus
Main Menu Settings
Electrode SI No ----
Sample ID Off, Manual, Auto Increment
Stability Smart, Fast, Medium, Slow
Averaging Off, Automatic Smart
Auto-Read, Timed,
Read Type
Single-Shot, Continuous
Limit Alarm
Alarm* Cal Due Alarm Off, On
Set Point Alarm Off, On
* The mV mode menu will not have the Cal Due Alarm option.
Detailed information on these features is available in the
Details
Use the alphanumeric keypad to enter the electrode
serial number or clear all to shown no value (----)
Use the popup keypad screen to enter an
alphanumeric manual ID or a numeric value as the
starting value for auto incremental ID
Set when a measurement is recognized as stable
Set averaging for faster measurement stability
For Timed and Single-Shot, set the time in hours,
minutes, seconds (HH:MM:SS) using the arrow keys
Off, On Set high and low limit values to activate alarm
Set a calibration interval (hours) to activate alarm
Set a base and offset value to activate alarm
Appendix section of this user manual.
Thermo Scientific