Customizing The Display; Meter And Module Maintenance - Thermo Scientific Orion Versa Star Pro User Manual

Thermo Scientific

Customizing the Display

The information shown in the measurement mode can be customized. Reducing the information
will increase the font size of the main measurement value in the single channel display.
1. In the measurement mode, press the setup key.
2. Press the ,,  or  key until Instrument Settings is highlighted and press the
f3 (Select) key.
3. The Display setting will be highlighted in the left column. Press the  key to also highlight
Display View and press the f3 (Select) key.
4. Press the  or  key to highlight an item and press the f3 (Select) key to check (display)
or uncheck (hide) the item. Some items will only be shown in the single channel display
when checked.
5. Press the f1 (Done) key and then press the measure (esc) key to return to the
measurement mode.
Example measurement display with all
information shown

Meter and Module Maintenance


For routine meter and module maintenance, dust and wipe with a damp cloth. If necessary,
warm water or mild water-based detergent can be used.

Meter maintenance can be performed on a daily, weekly or monthly basis, as required by
the operating environment.

Remove any spilled substances immediately from the meter or module using the proper
cleaning procedure for that spill type.
Chapter 2
Example measurement display with limited
information shown
Orion Versa Star Pro Meter User Manual

Meter Basics

21