Thermo Scientific Orion Versa Star Pro User Manual page 104


Chapter 8 Data Transfer and Software Updates

104 Orion Versa Star Pro Meter User Manual
1.
2.
To Get Timed
Measurements:
3.
1.
2.
To Get Auto-
Read
Measurements:
3.
1.
2.
To Get Single
Shot
Measurements:
3.
SETCHANNEL X <CR>
a. X = Channel number
b. For multiple channels, enter channel numbers without commas
c. Example: SETCHANNEL 1 <CR>
SETREADTYPE X, 2, Z <CR>
a. X = Channel number
b. Y = Read Type (2 = Timed)
c. Z = Time interval in seconds
d. Example: SETREADTYPE 1, 2, 5 <CR>
STOP <CR>
a. Ends the timed measurement command
SETCHANNEL X <CR>
a. X = Channel number
b. For multiple channels, enter channel numbers without commas
c. Example: SETCHANNEL 1 <CR>
SETREADTYPE X, 1 <CR>
a. X = Channel number
b. Y = Read Type (1 = Auto-Read)
c. Z = leave blank
d. Example: SETREADTYPE 1, 1 <CR>
GETMEAS <CR>
a. Prints the displayed channel measurement once the Auto-Read
stability criteria is met
b. Example: GETMEAS <CR>
SETCHANNEL X <CR>
a. X = Channel number
b. For multiple channels, enter channel numbers without commas
c. Example: SETCHANNEL 1 <CR>
SETREADTYPE X, 3, Z <CR>
a. X = Channel number
b. Y = Read Type (3 = Single Shot)
c. Z = Time interval in seconds
d. Example: SETREADTYPE 1, 3, 120 <CR>
GETMEAS <CR>
a. Prints the displayed channel measurement once the Single
Shot time interval criteria is met
b. Example: GETMEAS <CR>
Thermo Scientific