Bank Switching - Omron ZW Series User Manual

Chapter 2
Functions and Operations during Measurement

Bank Switching

Switches banks.
As an example, here is an explanation of the procedure for setting BANK2:
Operating procedure
Steps
1
2
3
4
5
You can also switch the bank by entering the non-procedural command or from Smart Monitor ZW.
ZW
2-20
User's Manual
Key operation Display
RUN RUN
FUN FUN
H L
L
TEACH TEACH
ZERORST/ ZERORST/ ESC ESC
ZERO/ SET ZERO/ SET
ZERORST/ ESC ZERORST/ ESC
ZERO/ SET ZERO/ SET
RUN RUN
FUN FUN
H L
L
TEACH TEACH
Current bank setting command <BS command> p.5-20
Smart Monitor ZW Operation Manual
RUN RUN
Press key for two seconds to enter the FUN
UNLIT
FUN FUN
L
TEACH TEACH
mode.
RUN RUN
Press or keys to select either of "BANK" and
press key.
ZERO/ SET ZERO/ SET
Press or keys to select either of "BK.CHG"
and press key.
ZERO/ ZERO/ SET SET
Select BANK2 for the bank number.
The current setting value is displayed on the sub-
display.
Press / keys to enter the editing mode, and the
sub-display blinks.
Select "BANK2" and press
RUN RUN
Press key for two seconds to enter the RUN
LIT
FUN FUN
L
TEACH TEACH
mode.
RUN RUN
Description
key.
ZERO/ SET ZERO/ SET