Memo Pad - Icom IC-7610 Advanced Manual

7. MEMORY OPERATION

Memo Pad

There are 5 Memo Pads as the default to save
frequencies and operating modes for easy write and
recall. You can increase the Memo Pads to 10 in
"Memopad Numbers. "
» SET > Function > Memo Pad Quantity
MENU
L The Memo Pads are separate from memory
channels.
D Saving the displayed contents into a
Memo Pad
1. Select the Main band or Sub band.
(Example: Main band)
QUICK
2. Push , then touch "VFO/MEMORY" in the
Quick menu.
3. Touch [VFO] to select the VFO mode.
4. Push to save the displayed content.
MP-W
• A beep sounds.
LTo save additional Pads, repeat steps 1 to 4.
L When you save up to the set number of Memo Pads
in "Memo Pad Quantity," the oldest Memo Pad is
automatically cleared to make room for the new
Memo Pad.
Memo Pads are convenient when you want to
temporarily memorize a frequency and operating
mode, such as when you ind a DX station in a
pile-up, or when the desired station is busy for a long
time and you want to temporarily search for other
stations.
Use Memo Pads instead of relying on hastily
scribbled notes that are easily misplaced.
D Calling up the Memo Pads
1. Select the Main band or Sub band.
(Example: Main band)
2. Push .
MP-R
L Pushing
MP-R
the Memo Pads.
About the MEMO PAD screen
The MEMO PAD screen displays the saved contents
in a list, in which you can select or delete the saved
contents.
To display the MEMO PAD screen,
z Push
MP-R for 1 second or touch [MPAD] on the
MENU screen.
» MPAD
MENU
L If you change the frequency or operating mode
called up from Memo Pads, the contents are
automatically updated in a temporary Pad.
Key
▲/▼
Scrolls through the list.
Touch
DEL
1 second
Touch
DEL ALL
1 second
Select to display the MEMO PAD list in a
EXPAND
normal or larger size screen.
65
scrolls through the contents saved in
Temporary Pad
Action
Deletes the selected Memo Pad.
Deletes all the Memo Pads.