Line Segmentation - Leica FlexLine plus User Manual

7.5.7
Description
Access
Segment Definition
FlexLine plus, Programs

Line Segmentation

The line segmentation subprogram calculates and displays the stake out elements for
the points along the line, orthogonal (∆L, ∆O, ∆H) and polar (∆Hz, 
Segmentation is limited to the reference line, between the defined start and end
points of the line.
Example Line Segmentation Stakeout
d2
a
P1
d1
TSOX_040
Press Segment from the Reference Line - Info screen.
Enter either the number of segments, or the length of segments and define how the
remaining line length is treated. This misclosure can be placed at the start, at the end,
at the start and the end or distributed evenly along the line.
Field Description
Line Length Calculated length of the defined reference line.
Length of each segment. Updated automatically if the number of
Segment
segments is entered.
Length
Segment No. Number of segments. Updated automatically if the segment length is
entered.
Any remaining line length after segment length has been entered.
Misclosure
Method of misclosure distribution.
Distrib.
None
At start
Equal
StartEnd The misclosure is equally distributed at the start and at the
Next step
Press Cont to proceed to the Line Segment - Stakeout screen.
P2
P0 Instrument station
P1 First reference point
P2 Second reference point
a
d1 Segment length
P0
d2 Misclosure
All of the misclosure will be placed after the last segment.
All of the misclosure will be placed before the first segment.
The misclosure will be equally distributed between all
segments.
end of the segment line.
Reference line
, 
). Line
77