Regional Settings - Leica FlexLine plus User Manual

5.2
Access

Regional Settings

FlexLine plus, Settings
Regional Settings
1. Select Settings from the Main Menu.
2. Select Regional from the Settings Menu.
3.
Press to scroll through the screens of available settings.
Field Description
Hz Increment Right
Left
Sets the vertical angle.
V-Setting
Zenith
Horizon
Slope [%]
Sets if the vertical angle value recorded is the value that is displayed
V After DIST
when Dist or when Store is pressed. The vertical angle field in a
measurement screen always shows the running angle, regardless of
this setting.
Hold
Running
Delete
To delete an inactive language. Avail-
able when the language is highlighted.
Set horizontal angle to clockwise direction measure-
ment.
Set horizontal angle to counter-clockwise direction
measurement. Counter-clockwise directions are
displayed but are saved as clockwise directions.
Zenith=0°; Horizon=90°.
TSOX_018
Zenith=90°; Horizon=0°.
Vertical angles are positive above the
horizon and negative below it.
TSOX_019
Slope %
45°=100%; Horizon=0°.
+300 %
--.--%
+100%
Vertical angles are expressed in % with
+18 %
positive above the horizon and nega-
360s
0°
gon
±V
tive below it.

-100 %
--.--%
The % value increases rapidly. --
-300 %
TSOX_020
.--% appears on the display above
300%.
The vertical angle value that is recorded is the value
that was in the vertical angle field at the time Dist
was pressed.
The vertical angle value that is recorded is the value
in the vertical angle field at the time Store is
pressed.
43