8.4
Description
Access
Check Tie
Messages
FlexLine plus, Favourites
Check Tie
This favourite calculates and displays the slope and horizontal distance, height differ-
ence, azimuth, grade, and coordinate differences between the last two measured
points. Valid distance measurements are required for the calculation.
a
P1
P0
TSOX_021
1.
Press the FNC/Favourites key when within any program.
2.
Select
CheckTie from the Favourites Menu.
Field
Description
Bearing
Difference in bearing between the two points.
Grade
Difference in gradient between the two points.
Difference in horizontal distance between the two points.
Difference in slope distance between the two points.
Difference in height between the two points.
The following are important messages or warnings that may appear.
Messages
Two measurements
required!
P2
a
Azimuth
Slope distance
Height distance
Horizontal distance
P0 Instrument station
P1 First point
P2 Second point
Description
The values cannot be calculated as there are less than two
valid measurements.
127