Leica FlexLine plus User Manual page 164

Status information
on the instrument
Report stolen
instrument
Locate stolen
instrument
FlexLine plus, mySecurity
Step Description
After the activation, the end date of the theft protection is displayed in the
mySecurity Online Update program and on the instrument.
8. Press Close.
9. Click the Refresh button to update the screen information.
10. Check the status, the activation date and the renewal date of the theft
protection.
Step Description
1. Select Tools from the Main Menu.
2. Select Info from the Tools Menu.
3. Go to page 4/4 or Dates.
4.
mySec.Renewal Date:
Displays the date when the instrument must be connected to mySecurity.
The date is transferred from myWorld to the instrument.

Ten days before the mySec.Renewal Date, a reminder message is displayed
each time the instrument is turned on.

When the mySec.Renewal Date has been exceeded, a message informs
about the instrument lock. Go to myWorld to renew the theft protection.
Step Description
1. Go to myWorld@Leica Geosystems (https://myworld.leica-geosys-
tems.com).
2. Select myTrustedServices/mySecurity.
3. Click the check box to select an instrument.
4. Click Details.
5. In the General section, click Report as Stolen.
6. A warning comes up to confirm device as stolen.
Click OK.
7. The Status of the instrument changes to Stolen!.
A Leica Geosystems service centre informs local authorities if such an instru-
ment turns up.
If a reported, stolen instrument is registered to myWorld, then the IP address of the
computer is logged. The IP address is used to locate the instrument.
In myWorld/myTrustedServices/mySecurity, the Status of the instrument changes
to Located.
Clicking Show Location shows:
• The date and time when the instrument was located
• The IP address of the computer
• A link to show the location on a map
164