Operation; Instrument Setup - Leica FlexLine plus User Manual

4
4.1
Description

Tripod
FlexLine plus, Operation

Operation

Instrument Setup

This topic describes an instrument setup over a marked ground point using the laser
plummet. It is always possible to set up the instrument without the need for a marked
ground point.
Important features
• It is always recommended to shield the instrument from direct sunlight and avoid
uneven temperatures around the instrument.
• The laser plummet described in this topic is built into the vertical axis of the instru-
ment. It projects a red spot onto the ground, making it appreciably easier to centre
the instrument.
• The laser plummet cannot be used with a tribrach equipped with an optical
plummet.
TSOX_012b
TSOX_012a
TSOX_012c

When setting up the tripod pay attention to
ensuring a horizontal position of the tripod
plate. Slight corrections of inclination can
be made with the foot screws of the
tribrach. Larger corrections must be done
with the tripod legs.
Loosen the clamping screws on the tripod
legs, pull out to the required length and
tighten the clamps.
a) In order to guarantee a firm foothold
sufficiently press the tripod legs into the
a
ground.
b) When pressing the legs into the ground
note that the force must be applied along
the legs.
b
Careful handling of tripod.
• Check all screws and bolts for correct fit.
• During transport, always use the cover
supplied.
• Use the tripod only for surveying tasks.
34