Stake - Leica FlexLine plus User Manual

7.13.4
Description
Access
Stakeout
Next step
FlexLine plus, Programs

Stake

The subprogram Stake is used to stake out points relative to an existing alignment.
The height difference is relative to a vertical alignment or manually entered height.
c
b
a
e+
P1
f+
g+
P2
P0
TSOX_054
Press Stake from the Define Stake/Check/Slope values screen.
Field Description
Selected chainage to stake out.
Chainage
∆Hz
Angle offset: Positive if the stake out point is to the right of the meas-
ured point.

Horizontal offset: Positive if the stake out point is further away than
the measured point.
∆Height
Height offset: Positive if the stake out point is higher than the meas-
ured point.
∆Chain
Longitudinal offset: Positive if the stake out point is further away than
the measured point.
∆Offset
Perpendicular offset: Positive if the stake out point is to the right of
the measured point.
Calculated East coordinate of the stake out point.
Def.East
Calculated North coordinate of the stake out point.
Def.North
Def.Hght Calculated Height of the stake out point.
• Either, press Meas to measure and record.
• Or, press ESC to return to the Define Stake/Check/Slope values screen.
P0 Instrument station
P1 Target point
P3
P2 Measured point
P3 Measured point
g-
a
b
d
e- c
f-
d
e+  Offset, positive
e-  Offset, negative
f+  Chainage, positive
f-
g+  Height, positive
g-  Height, negative

Horizontal alignment
Defined chainage
Offset
Height difference
 Chainage, negative
To find/enter codes, press the
FNC/Favourites key and select
Coding.
108