Mysecurity - Leica FlexLine plus User Manual

15
Description

Adding/removing
instruments
to/from mySecurity
Activating the theft
protection
FlexLine plus, mySecurity

mySecurity

mySecurity is a cloud-based theft protection. A locking mechanism ensures that the
instrument is disabled and can no longer be used. A Leica Geosystems service centre
will inform local authorities if such an instrument turns up.
mySecurity is activated in myWorld.
mySecurity is supported firmware version 3.01 or higher.
The protection level for FlexLine plus instruments is higher than for Flexline instru-
ments. On FlexLine plus instruments it is not possible to upload firmware versions
lower than 3.01 which do not support mySecurity. On FlexLine instruments it is
possible to load older firmware that mySecurity does not support.
Step Description
1. Go to myWorld@Leica Geosystems (https://myworld.leica-geosys-
tems.com).

You must add your instruments to myProducts first, before the instru-
ments can be added to mySecurity.
2. Select myTrustedServices/mySecurity.
Available information for listed instruments:
• Activation date of the mySecurity service
• Renewal date of the mySecurity service
• Stolen status, in case of the instrument has been flagged as stolen
3. Click Add to add an instrument to mySecurity.
Select the instrument from the selectable list.
Click OK.
4. Select an instrument.
Click Remove to delete the instrument from mySecurity.
For an active theft protection, the instrument must be connected to myWorld within
a defined time interval.
If the instrument is not connected within the defined interval, then the instrument is
blocked and cannot be used. In this case, the instrument must be connected to
myWorld again and the theft protection must be reactivated.
Step Description
1. Click the check box to select an instrument.
2. Click Details.
3. For New mySecurity Renewal, set the start date of the theft protection.
Click In 3 months, In 6 months or In 12 months to define the connection
interval.
4. Click Set.
5. Download and install the mySecurity Online Update program.
6. The program scans for the instrument connection port automatically.
In case automatic scanning fails, click Scan for a search of the port.
Select the connection settings.
7. Click Connect.
163