Settings; Work Settings - Leica FlexLine plus User Manual

5
5.1
Access

Work Settings

FlexLine plus, Settings

Settings

Work Settings
1. Select Settings from the Main Menu.
2. Select Work from the Settings Menu.
Field Description
Trigger Key 1 is the top end of the trigger key. Trigger Key 2 is the
Trigger Key1
lower end of the trigger key.
Trigger Key2
Off
Meas
Dist
USER Key 1
Configures
USER Key 2
to "8 Favourites".
Tilt Correct Off
On

If the instrument is used on an unstable base, for example a shaking
platform or ship, the compensator should be deactivated. This avoids
the compensator drifting out of its measuring range and interrupting
the measuring process by indicating an error.
Hz Corr. On
Off
Fixed to Point ID Shown on a page in Quick Survey and Survey.
Line1
Line2 to The settings define the parameters shown on a page in Quick Survey
and Survey.
Line14
Target Height
Code
Hz angle
V angle
Hor. dist.
Slope dist.
Height diff.
Easting
Northing
The trigger key is deactivated.
Sets the trigger key with the same function as Meas.
Sets the trigger key with the same function as Dist.
or with a function from the Favourites menu. Refer
Tilting compensation deactivated.
2-axis compensation. Vertical angles refer to the
plummet line and the horizontal directions are
corrected by the standing axis tilt.
For corrections depending on the Hz Corr. setting,
refer to the table "Tilt and horizontal corrections".
Horizontal corrections are activated. For normal
operation the horizontal correction should remain
active. Each measured horizontal angle will be
corrected, depending on the vertical angle.
For corrections depending on the Tilt Correct
setting, refer to the table "Tilt and horizontal correc-
tions".
Horizontal corrections are deactivated.
Input field for prism height.
Editable field for codes.
Display only field for the horizontal angle.
Display only field for vertical angle.
Display only field for horizontal distance.
Display only field for measured slope distance.
Display only field for the height difference between
station and reflector.
Display only field for Easting coordinate of meas-
ured point.
Display only field for Northing coordinate of meas-
ured point.
41