Leica FlexLine plus User Manual page 120

Traverse Results
Set Adjustment
Parameter
FlexLine plus, Programs
Field
Traverse ID
Start Stn.
End Stn.
No.of Stn.
Total Dist.
1D Accuracy
2D Accuracy
L of Error
Azimuth Err.
∆East, ∆North, ∆Height
Next step
Press Adjust from the Traverse Results screen to calculate the adjustments.
Field Description
No.of Stn. Number of stations in the traverse.
Azimuth Err. Azimuth closure error.
For misclosure distribution.
Misc.-Distr.

Compass
Transit
The height error can be distributed equally, by distance or not at all.
Height-Distr
Adjust
ViewTol
S-Shot
EndTrav
Description
Name of the traverse.
Point ID of the start station.
Point ID of the end station.
Number of stations in the traverse.
Total distance of the traverse.
Accuracy in 1D
Accuracy in 2D
Length/distance error.
Azimuth closure error.
Calculated coordinates.
Angle misclosures are distributed equally.
For surveys where angles and distances were meas-
ured with equal precision.
For surveys where angles were measured with a
higher precision than the distances.
To calculate an adjustment. Unavail-
able when the traverse is left open.
To view the tolerances for the trav-
erse.
To measure a sideshot.
To record the results and end the trav-
erse.
(
Length of Traverse
1/
Height Misclosure
(
Length of Traverse
1/
Linear Misclosure
)
)
120