Leica FlexLine plus User Manual page 42

Tilt and horizontal
corrections
FlexLine plus, Settings
Field Description
Height
Line space
Measurements To display only measured points.
Show in Map
Fixpoints
Meas & Fixpts To display measured points and fixpoints.
Show PtID Yes
No
Show PtCode Yes
No
Only 50 Pts Yes
No
Center to
The selection changes the behaviour of the
toolbar and the naming of the corresponding softkey.
Station
Target
Icon1 to Icon7 Available for C&T. To configure which status icons are displayed and
their position. The clock is always displayed. The position of the clock
cannot be changed. The ID of the icons increases from left to right.
Setting
Tilt Horizontal
correction correction
Off On
On On
Off Off
On Off
Display only field for the height coordinate of the
measured point.
Insert full line space.
To display only fixpoints.
The ID of a point is displayed in the map.
Display of point IDs in the map is deactivated.
The code of a point is displayed in the map.
Display of point codes in the map is deactivated.
Only the first 50 point labels are displayed in the
map.
All point labels are displayed in the map, regardless
of the number of points in the job.
To centre the map on the instrument.
To centre the map on the target.
Correction
Incline Incline
longitudinal transversal
No No
Yes Yes
No No
Yes No
icon on the Mapview
Horizontal Tilting axis
collimation
Yes Yes
Yes Yes
No No
No No
42