Starting A Program - Leica FlexLine plus User Manual

6.2
Access
Pre-settings
screens
FlexLine plus, Programs - Getting Started

Starting a Program

1. Select Programs from the Main Menu.
2.
Press to move through the screens of available programs.
3. Press the number of the program (for Black&White display) or tab on an icon
(for Color&Touch display) to select the specified program in the Programs
Menu.
Pre-settings for Survey is shown as an example. Any additional settings for particular
programs are explained within the chapters for those programs.
Field Description
To define the job where data will be saved. Refer to "6.3 Setting
F1 Set Job
the Job".
F2 Station Setup To determine the station coordinates and station orientation.
Refer to "6.4 Station Setup".
Starts the selected program.
F4 Start
Page key for B&W or tap on page for C&T
to change to another page. Refer to "5.4
Screen & Audio Settings" to turn off the
program description.
Cont
To change to the next screen.
[ • ] = Setting has been made.
[ ] = Setting has not been made.
F1-F4
To select menu item.
56