Stakeout - Leica FlexLine plus User Manual

7.6.4
Description
Stake out point
Stake out arc
Stake out chord
Stake out angle
Access
FlexLine plus, Programs

Stakeout

The Stakeout subapplication calculates the difference between a measured point and
the calculated point. The Reference Arc program supports four ways to stake out:
• Stake out point
• Stake out arc
To stake out a point by entering a line and an offset value.
P3
c-
b+
P2
a
P1
TSOX_042
To stake out a series of equidistant points along the arc.
P4
P3
b
b P2
a
P1 P0
TSOX_043
To stake out a series of equidistant chords along the arc.
P3 P4
P2
b
P1
P0
a
TSOX_044
To stake out a series of points along the arc defined by the angle segments from the
center point of the arc.
P3
P4
P2
b
b
b
a
P0
P1
TSOX_045
1) Press Stake from the Reference Arc - Info screen.
2) Select one of the four methods of stake out available.
• Stake out chord
• Stake out angle
P4
P0 Center point of arc
P1 Start point of arc
P2 Measured point
P3 Stake out point
P4 End point of arc
a Radius of arc
b+ Line offset
P0
c- Perpendicular offset
P0 Center point of arc
P1 Start point of arc
P2 Stake out point
P3 Stake out point
P4 End point of arc
a Radius of arc
b Arc length
P0 Center point of arc
P1 Start point of arc
P2 Stake out point
P3 Stake out point
P4 End point of arc
a Radius of arc
b Chord length
P0 Center point of arc
P1 Start point of arc
P2 Stake out point
P3 Stake out point
P4 End point of arc
a Radius of arc
b Angle
82