Programs; Common Fields - Leica FlexLine plus User Manual

7
7.1
Description of
fields
FlexLine plus, Programs

Programs

Common Fields

The following table describes common fields that are found within the firmware
programs. These fields are described here once and not repeated in the program chap-
ters unless the field has a specific meaning within that program.
Field
PtID, Point, Point 1
hr
Remark / Code
Hz
V
East
North
Height
Description
Point ID of the point.
Height of the reflector.
Remark or Code name depending on the coding method.
Three coding methods are available:
• Remark coding: This text is stored with the corre-
sponding measurement. The code is not related to a
codelist, it is just a simple remark. A codelist on the
instrument is not necessary.
• Expanded coding with codelist: Press Code. The code
that was entered is searched for within the code list
and it is possible to see, change and/or add attributes
to the code. If a code is selected the field name will
change to Code. To toggle through the codelist,
change to page 4/4 for Black&White displays or to page
Code for Color&Touch displays.
• Quick coding: Press Q-Code and enter the shortcut to
the code. The code is selected and the measurement
starts. The field name will change to Code:.
Horizontal direction to the point.
Vertical angle to the point.
Horizontal distance to the point.
Slope distance to the point.
Height to the point.
Easting coordinate of the point.
Northing coordinate of the point.
Height coordinate of the point.
59