Leica FlexLine plus User Manual page 94

Area Division
FlexLine plus, Programs
1. Measure or select existing points to define the area.
2. The 2D area is calculated automatically and displayed once three points have been
measured or selected.

Only the 2D area is used for area division.
3. Press Calc.
4. 2D Area Results screen:
5. Press MeasDiv.
6. For Parallel line(%) and Perpend. line(%):
Measure or select existing points to define
the area division line.
7. Press Calc.
8. For Parallel line(%) and Perpend. line(%):
Enter the percantage of the area division
ALeft for the new left area.
9. Press Calc.
Field Description
Left and Right The size of the sub areas in percent.
Area
The size of the sub area in m
The perimeter of the sub area in m.
Per.
The first intersection point of the new boarder with the original
Ptn1
area.
Ptn2 The first intersection point of the new boarder with the original
area.
The angle of the new border from rotation point to the new point.
Azim.
NewArea
To measure or define a new area.
MeasDiv
To define the area division
according to the previous selected
method.
End
To exit the program.
For Swing line(%):
Select an existing point of the area to
define the rotation point of the swing
line.
For Swing line(%):
Enter the percantage of the area divi-
sion ALeft for the new left area.
NewArea
To measure or define a new area.
New Div
To define a new area division.
Stake
To stake out the calculated points.
End
To store the intersection points as
fixpoints and to exit the program.
2
.
94