Pointsearch - Leica FlexLine plus User Manual

3.6
Description
Direct search
Wildcard search
Examples of point
searches
FlexLine plus, User Interface

Pointsearch

Pointsearch is a function used by programs to find measured points or fixpoints in the
memory storage.
It is possible to limit the point search to a particular job or to search the whole storage.
The search procedure always finds fixpoints before measured points that fulfil the
same search criteria. If several points meet the search criteria, then the results are
ordered according to the entry date. The instrument finds the most recent fixpoint
first.
By entering an actual point number, for example 402, and pressing Find, all points
within the selected job and with the corresponding point number are found.
The wildcard search is indicated by a "*". The asterisk is a place holder for any
following sequence of characters. Wildcards should be used if the point number is not
fully known, or to search for a batch of points.
* All points are found.
A All points with exactly the point number "A" are found.
A* All points starting with "A" are found, for example, A9, A15, ABCD, A2A.
*1 All points containing only one "1" are found, for example, 1, A1, AB1.
A*1 All points starting with "A" and containing only one "1" are found, for example,
A1, AB1, A51.
Find
To search for matching points within
the selected job.
ENH=0
To set all ENH coordinates for the point
ID to 0.
32