User Interface - Emerson EC2-XC645CX Installing And Operating Instructions

USER INTERFACE

8.1 Displaying
UPPER DISPLAY
Suction temperature or
pressure
8.2 Keyboard
SET (SET)
Standard visualization: to see or modify the set point. In programming mode it selects
a parameter or confirms an operation.
Alarm menu: By holding it pressed for 3s, the current alarm is erased.
o
(UP).
In programming mode: it browses the parameter codes or increases the displayed
value.
With Hot key inserted: it starts the Hot key programming procedure.
To access the INFO menu: push and release it to access the INFO menu.
n
(DOWN)
In programming mode: it browses the parameter codes or decreases the displayed
value.
Manual restart of loads: By holding it pressed for 3s, it switches on again loads
previous locked by a safety digital input alarm.
MAINTEINANCE/CLOCK: To display the loads running hours.
By holding it pressed for 3s the Maintaining menu is entered
To enter the Alarm menu
KEY COMBINATIONS
o n
+
To lock and unlock the keyboard.
n
SET +
To enter the programming mode.
o
SET + To exit the programming mode.
OI_EC2-XC645CX_A1_A2L_A3_EN_Rev01_866933.docx
LOWER DISPLAY
Discharge temperature or pressure - Working loads
- Measurement unit
- Alarm or status Icons
EC2-XC645CX
ICONS
14/54