The Main Screen; Operating Overview - Waters Alliance e2695 Operator's Manual

3 Prepare the e2695 Separations Module for Operation
Once the electronic part of the diagnostics test is complete, the display shows
the test results.

The Main screen

When the initial part of the test routine is successful, the Main screen appears
in the display. The startup diagnostics routine continues, initializing these
systems:
• Needle, syringe, and valves
• Carousel carrier
• Solvent management system
The statuses of these mechanical diagnostics tests appear in the banner area
of the Main screen while the tests are running. If the test routine is not
successful, see
to completion, the separations module becomes idle.
Main screen:
Banner
area
Data area
Screen
keys

Operating overview

Whether you operate the separations module as a standalone device or via
remote control, you prepare it for operation by interacting with the Main
screen.
84 July 29, 2013, 715003794 Rev. B
"Troubleshoot" on page 243. When the startup diagnostics run