The Main Screen
When the initial part of the startup diagnostics routine is successful, the Main screen
appears in the front panel display
by initializing the:
• Needle, syringe, and valves
• Carousel carrier
• Solvent management system
The statuses of these mechanical diagnostics tests appear in the banner area of the Main
screen
(Figure
not successful, refer to the Waters 2690 Separations Module Operator's Guide , Section
8.5, Troubleshooting. When the startup diagnostics routine is complete, the Separations
Module enters the Idle mode.
Banner Area
Data Area
Screen Keys
8
Preparing the Separations Module for Operation
(Figure
2-2) while the diagnostics are running. If the startup diagnostics routine is
Figure 2-2 Main Screen
2-2). The startup diagnostics routine continues