Waters Alliance e2695 Operator's Manual page 170

6 Create Methods, Sample Sets, and Sample Templates
See also:
programming detector events.
The following tables list the parameters for a Waters 2487 Detector and a
Waters 486 Detector.
2487 UV/Vis parameters:
Parameter
λ (wavelength)
Sensitivity
Filter
Polarity
Auto zero on
inject
486 UV/Vis parameters:
Parameter
λ (wavelength)
Sensitivity
Filter
Polarity
Auto zero on
inject
170 July 29, 2013, 715003794 Rev. B
"Edit the detector table" on page 172
Function
Sets the wavelength of the detector.
Sets the sensitivity of the detector.
Sets the time constant of the filter in
the detector.
Selects the output of the 2487 to
create positive or negative peaks.
Resets the output of the 2487 to 0
volts when the injection begins.
Function
Sets the wavelength of the detector.
Sets the sensitivity of the detector.
Sets the time constant of the filter in
the detector.
Selects the output of the 486 to create
positive or negative peaks.
Resets the output of the 486 to 0 volts
when the injection begins.
for steps on
Value range
190 to 700 in 1-nm
increments
0.0001 to 4.0000 in
0.0001-AU
increments
0.1 to 99.0 in
0.1-sec increments
+, –
Selected or
deselected
Value range
190 to 600 in 1 nm
increments
0.001 to 2.000 in
0.001 AU
increments
0.1 to 5.0 in 0.1 sec
increments
+, –
Selected or
deselected