2 Install the e2695 Separations Module
Column regeneration valve connections (example):
Red line
in
IN
External pump
Regenerant
Connect the detector
The following provides general instructions for connecting the detector to the
Alliance HPLC system. For more detailed information on connecting your
specific detector, see the detector's documentation.
To connect the detector:
1.
Connect the outlet of the column to the inlet of the detector.
2.
Connect a waste line from the detector outlet to a suitable waste
container.
68
July 29, 2013, 715003794 Rev. B
Column B
10
1
9
8
2
3
7
6
4
5
Column A
Waste
OUT
Out to
detector