Waters Alliance e2695 Operator's Manual page 42

1 Getting started with the Alliance e2695 Separations Module
The e2695 has four column selection valve options, as described in the
following table.
Column selection valve options:
Description
2 Column (6 port, 2 position) No
3 Column
6 Column
2 Column- Regeneration
(10 port, 2 position)
The software automatically detects the presence and type of column selection
valve when you power-on the separations module. You can specify column
selection:
• Using the front panel (see
• Through the separation method (see
methods" on page
• As part of a function in the sample set method (see
sample set" on page
The Status screen shows the currently selected column or flow path for only
those valves detected by the software.
42 July 29, 2013, 715003794 Rev. B
Software
detection
Yes
Yes
Yes
"Perform direct functions" on page
"Create and edit separation
146)
174)
Controlled by
I/O
e2695 software
e2695 software
e2695 software
"Create and edit a
123)