Table of Contents
Advertisement
Keypad test
The keypad test tests the keypad keys. You press the key on the keypad and
observe the key as it changes appearance in the Keypad diagnostic screen.
Run this test if you experience problems with the keypad.
To perform the keypad test:
1.
In the Other Diagnostics screen, select Keypad, and then press OK. The
Keypad diagnostic screen appears.
2.
Follow the on-screen instructions to perform the test.
Display test
The display test tests the display screen by projecting test patterns on it. Run
this test if you experience problems with the separations module's display.
To perform the display test, select Display in the Other Diagnostics screen,
and then press OK.
Carousel test
The Carousel test tests these components:
•
Vial sensor
•
Carousel ID sensor
•
Carousel drive
Run this test if you experience problems with the carousel carrier system.
To perform the carousel test:
1.
In the Other Diagnostics screen, select Carousel, then press OK.
2.
follow the instructions in the Carousel test screen.
Sample heater/cooler test
The sample heater/cooler test tests the sample heater/cooler for proper
functioning. It ramps down the temperature in the sample heater/cooler and
then measures the rate at which the temperature rises.
Perform other diagnostic tests and functions
July 29, 2013, 715003794 Rev. B
239
Advertisement
Table of Contents
Troubleshooting
