Separations Module Spare Parts; Vials And Low Volume Inserts - Waters Alliance e2695 Operator's Manual

C Spare Parts
Recommended spare parts for the sample management system: (Continued)
Item:
Sample loop, 2-mL
Needle Wash Frit (one piece design) for
the Lower Seal Wash Body (5 per pack)
PerformancePLUS needle
a. Refer to the
inserts:" on page 287
syringe draw depth offsets.

Separations module spare parts

Recommended spare parts for the separations module
Item:
Cable assembly, AC power
Cable assembly, IEEE-488, 1 m
Detector drip tray assembly
Diffuser assembly (poly)
Diffuser assembly (stainless steel, 1)
Ethernet Switch Communications
Kit

Vials and low volume inserts

The following table provides information about Waters-supplied: vials and low
volume inserts (LVI) available for use with the separations module, vial and
LVI bottom thicknesses, and syringe draw depth offsets that may be required.
286 July 29, 2013, 715003794 Rev. B
table titled "Separations module vials and low volume
for a complete list of vials, low volume inserts, and
Part number:
WAT096106
700001318
700001247
Part number:
WAT270895
WAT087198
WAT271040
WAT007272
WAT025531
700004123