Edit A Separation Method; Copy And Edit A Separation Method - Waters Alliance e2695 Operator's Manual

Edit a separation method

To edit an existing separation method:
1. On the Main screen, press the Develop Methods screen key.
2. In the Methods screen, select the separation method you want to edit.
If the separation method is locked, the Edit screen key is inactive,
Tip:
and a lock icon appears beside the method name. To unlock a locked
separation method, see "Locking and unlocking a separation method",
below.
3. Press the Edit screen key.
4. Enter the new parameter values in the appropriate screens.
See
Tip:
5. To save the method, press Exit and then the Yes screen key.

Copy and edit a separation method

To copy and edit an existing separation method, leaving the original method
unchanged:
1. On the Main screen, press the Develop Methods screen key.
2. In the Methods screen, select the separation method you want to copy.
3. Press the Copy screen key.
4. Enter the name of the new method in the dialog box that appears, and
then press Enter.
The separations module automatically adds the appropriate method
Tip:
extension.
5. Enter the new parameter values in the appropriate screens.
See
Tip:
6. To save the method, press Exit and then the Yes screen key.
"Set separation method parameters" on page 150
"Set separation method parameters" on page 150
Create and edit separation methods
July 29, 2013, 715003794 Rev. B
for details.
for details.
149