Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
7.3.10
Configuring Linear Scan
Steps:
1. Get to the linear scan interface:
Configuration > Advanced Configuration> PTZ > Linear Scan.
2. Select Camera 1 or Camera 2 from the Channel No. list.
3. Zoom in and zoom out the camera to the appropriate zoom ratio.
4. Click Save Ratio to save the zoom ratio.
5. Optionally, you can click Enable Saved Ratio to set the camera to the saved zoom ratio.
6. Click Set Scan Area and set the left/right/up/down limits with the PTZ control panel
and Iris+/- button.
7. Optionally, you can click Clear to delete the saved scan area.
8. Click Save to save the settings and the Linear Scan Area shows Scan area saved.
9. Click Start Linear Scan and Stop Linear Scan to start and stop the saved linear scan.
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
Figure 7-38 Linear Scan
Available from A1 Security Cameras
104
Advertisement
Table of Contents
