Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
Select Camera 1 and the device plays the live view of Camera 2 inside the live view of
Camera 1.
2. Check the checkbox of Enable.
3. Drag the red frame to adjust the picture in picture site.
4. Click Save to activate above settings.
The Picture in Picture function is reserved.
7.5 Configuring System Settings
7.5.1 System Settings
Viewing Basic Information
Enter the Device Information interface:
Configuration > System > System Settings > Basic Information
In the Basic Information interface, you can edit the Device Name and Device No..
Other information of the network zoom camera, such as Model, Serial No., Firmware
Version, Encoding Version, Web Version, Plugin Version, Number of Channels, Number of
HDDs, Number of Alarm Input and Number of Alarm Output are displayed. The information
cannot be changed in this menu. It is the reference for maintenance or modification in
future.
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
Figure 7-57 Picture in Picture
Available from A1 Security Cameras
118
Advertisement
Table of Contents
