Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
regularly, especially in the high security system, resetting the password
monthly or weekly can better protect your product.
4. Click OK to save the password.
You can check whether the activation is completed on the popup window. If activation
failed, please make sure that the password meets the requirement and then try again.
5. Change the device IP address to the same subnet with your computer by either
modifying the IP address manually or checking the checkbox of Enable DHCP.
6. Input the password and click Save to activate your IP address modification.
Activation via Client Software
The client software is versatile video management software for multiple kinds of devices.
Get the client software from the supplied disk or the official website, and install the
software according to the prompts. Follow the steps to activate the camera.
Steps:
1. Run the client software and the control panel of the software pops up, as shown in the
figure below.
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
Figure 2-5 Modify the IP Address
Available from A1 Security Cameras
7
Advertisement
Table of Contents
