Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
Enable SNMP v3) to enable the feature.
3. Configure the SNMP settings.
The configuration of the SNMP software should be the same as the settings you
configure here.
4. Click
Configuring FTP Settings
Purpose:
You can set a FTP server and configure the following parameters for uploading captured
pictures.
Steps:
1. Enter the FTP settings interface:
Configuration > Network > Advanced Settings > FTP
2. Configure the FTP settings, including server address, port, user name, password,
directory, and upload type.
The server address supports both the domain name and IP address formats.
For your privacy and to better protect your system against security risks, we
strongly recommend the use of strong passwords for all functions and network
devices. The password should be something of your own choosing (using a
minimum of 8 characters, including upper case letters, lower case letters, numbers
and special characters) in order to increase the security of your product.
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
to save and finish the settings.
Figure 7-11 FTP Settings
Available from A1 Security Cameras
83
Advertisement
Table of Contents
