User Manual of Thermal Network Speed dome
7.
Check the checkbox of Enable Privacy Mask to enable this function.
You are allowed to draw up to 8 areas for the speed dome.
7.3.6 Configuring Scheduled Tasks
Purpose:
You can configure the network speed dome to perform a certain action automatically in a
user-defined time period.
Steps:
1. Enter the Scheduled Task settings interface:
Configuration> PTZ > Scheduled Tasks
2. Check the checkbox of Enable Scheduled Task.
3. Set the Park Time. You can set the park time (a period of inactivity) before the speed
dome starts the scheduled tasks.
4. Select the task type from the dropdown list. You can choose scan, preset, pattern and
etc.
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
Figure 7-32 Privacy Mask List
Figure 7-33 Configure Scheduled Tasks
Available from A1 Security Cameras
100