Table of Contents
Advertisement
User Manual of Thermal Network Speed dome
Figure 5-10 Motion Detection Settings-Expert
(1) Set the Schedule Image Settings, there are OFF, Auto-Switch and
Scheduled-Switch selectable. If the schedule image switch mode is enabled, you
can configure the detection rule for the day and night separately.
OFF: Disable the day and night switch.
Auto-Switch: Switch the day and night mode according to the illumination
automatically.
Scheduled-Switch: Switch to the day mode at 6:00 a.m., and switch to the night
mode at 18:00 p.m..
(2) Select Area No. to configure in the dropdown list.
(3) Set the values of sensitivity and proportion of object on area.
Sensitivity: The greater the value is, the easier the alarm will be triggered.
Proportion of Object on Area: When the size proportion of the moving object
exceeds the predefined value, the alarm will be triggered. The less the value is,
the easier the alarm will be triggered.
5. Set the Arming Schedule for Motion Detection.
(1) Click
© Hikvision
www.a1securitycameras.com email: sales@a1securitycameras.com
Steps:
tab to enter the arming schedule setting interface.
Available from A1 Security Cameras
43
Advertisement
Table of Contents
